Crossflight FC Main Features:

• Vibration Damping by Software: Ensure the accuracy of sensor data at all times, achieve better Altitude Hold effect, and make the flight more stable.

• OSD Module Integrated: Support real-time graphically display OSD information such as the flight direction and position of the aircraft without the need for an external OSD module.
• 10 Channels PWM Output: Adaptable to 3-8 Axis Multirotor, Airplanes, helicopters, cars, boats and multiple industries.
• Mini Size as F4: Only 39.7*39.7*13mm and 16.5g, helps save space and reduce total weight to lengthen the flight time.
• Easier Installation and Setting: Offer comprehensive technical support including the usage guidance needed for all functions from basic use, PID parameter adjustment, log viewing, etc. of each model.
• Automation Software Testing System: The same Automation Software Testing System as PIXHAWK and Mini Pix helps realizes test automation from the sensor to connection ports and interface.

Note:

* The crossflight can set parameters by Radiolink Mission Planner, ArduPilot Mission Planner, and QGC Mission Planner.

* The crossflight only can upgrade the firmware by Radiolink Mission Planner, and only can upgrade the firmware from Radiolink.

* You could download the Radiolink mission planner and firmware via our official website: https://radiolink.com/crossflight

Parameters:

• Connector: JST GH1.25 Connector
• PWM Output: 10 PWM Output
• Mavlink UART: 2(without CTSRTS)
• USB Port: 1(Type-C)
• GPS UART/I2C Port: 1
• RC In Signal Input: PPM/SBUS
• RSSI Output: Do not support
• OSD Module: OSD Module Integrated
• ESC Protocol: PWM
• DSHOT Protocol: Do not support
• ONESHOT Protocol: Do not support
• Neopix Led: Support
• Gripper Function: Support
• RTK：Support
• USB Voltage: 5V±0.3V
• Servo Voltage: Not applicable
• Operating Temperature: -40~80℃
• Adaptable Models: 3-8 copter/Airplane/Helicopter/Car/Boat
• Dimention: 39.7*39.7*13mm (1.56″*1.56″*0.51″)
• Weight: 16.5g(0.58oz), 54g(1.9oz when all the connect wires included)

Power Module Specifications:

• Input Voltage: 2-12S
• Input Current: 90A
• Output Voltage: 5.1V
• Output Current(BEC): 2.5A
• Input Current(connect to one ESC only): 20A

Hardware Specification:

• Processor: HC32F4A0PITB

• Gyro: ICM42670

• Compass: VCM5883

• Barometer: LPS22HB

• FRAM: Without FRAM, use the internal flash to store parameters, 2617 waypoints for multi-copters, and 2623 waypoints for airplanes

Package List: